This is a direct replacement convertible hydraulic roof hose for the Alfa Romeo Spider 916 with the old shape pump.
On the old shape pump, all 12 hoses exit the pump through a plate and are secured w..
This is a direct replacement convertible hydraulic roof hose for the new Alfa Romeo Spider 939.
Hoses (31) and (32) seem to be the problem hoses as they are get trapped and split.
As a rule, people ..
The hydraulic system on this model is quite simple only consisting of 4 hoses.
The hoses attach to both the pump and cylinders by female nuts.
Our hoses have a tough PTFE inner, wrapped in a stainle..
Our hoses have a tough PTFE inner, wrapped in a stainless steel braid and coated with a wipe-clean PVC coating. This triple layer of protection ensures the hose will never kink or burst by getting tra..
These are direct replacement hydraulic hoses for the Audi 80 using the old pump.
On the old pump, all 14 hoses exit the pump from the front via a metal plate and are held in place with a small clip.
..
The hoses attach to the pump via torex screws.
The hoses are secured to the cylinders via small clips.
As all the hoses are of differing lengths I will contact you on receipt of an order to fi..
On the old style pump, all the hoses exit the pump from the front via a metal plate and are held in place with a small clip.
Also on these models instead of using female nuts to secure the hoses to t..
.
The fittings on to the cylinders (rams) are female nuts.
As all the pipes are of differing lengths if you dont know exact one I will contact you on receipt of an order to find out which you need.
..
The fittings on to the cylinders are a mixture of straight and 90 degree push fits.
As all the pipes are of differing lengths if you dont know exact one I will contact you on receipt of an order to f..
This kit has a very extensive hydraulic system which uses a total of 26 hoses.
On the old style pump, all the hoses exit the pump from the front via a metal plate and are held in place with a small c..
The kit only has 6 hoses, each terminating with a straight male fitting.
Our hoses have a tough PTFE inner, wrapped in a stainless steel braid and coated with a wipe-clean PVC coating. This triple la..
This is a slightly different convertible as the roof comes off as one piece instead of retracting back into the vehicle.
It does, however, require a series of locking cylinders, which in turn require ..
These hoses differ from the M4 hoses because they use the same fitting to secure both the hydraulic pump and rams.
The main pipes that ever seem to cause problems with this model are 23, 24, 31 and 3..
Our hoses have a tough PTFE inner, wrapped in a stainless steel braid and coated with a wipe-clean PVC coating. This triple layer of protection ensures the hose will never kink or burst by getting tra..
The hydraulics on this newer model is somewhat more involved and now need 14 hoses in total.
On the new shape pump, all the hoses are removable individually via torex screws.
The ram ends are small ..
The hydraulics on this model is somewhat more involved than on some other systems.
On Phase 1 pumps, all the hoses exit the pump from the front via a metal plate and are held in place with a small cli..